null
loading ECHOGEAR top products  Loading... Please wait...

Full Motion Corner TV Mount - EGCM2

Full Motion Corner TV Mount - EGCM2

$74.99
 

Product Description

 

 

egcm2-eg-header.jpg

Perfect For Corners

with the full motion corner TV mount

$99.99

$74.99

Product carousel goes here

  • One StudSingle-stud mount
  • Perfect for corners

    Perfect for mounting in corners

  • 90lbs-icon.jpg

    90 lbs weight rating

  • Extendo 24

    Full motion with 24" extension

Fits TV dimensions Extension Tilt Swivel
Up To 75" 24" 15º 90º

 Single-Stud full motion mount with 24" of extension making it ideal for corner applications.

  • Mount your TV anywher on the wall, even in the corner. Flexable single stud design fits TVs up to 65" In the corner, or uo to 75" on a flat wall. 
  • With smooth motion like you on the dance floor, points this TV anywhere you need to. Extends 24" from the wall plus buttery swivel & tilt. 
  • Get your TV to sit perfectly in the corner at whatever angle you need. Extend 24" from the wall plus buttery swivel & tilt/ 
  • Breezy install is done in under 30 minutes. This mount comes with pre-sorted hardware that fits any TV brand. Plus, you get an install template for picture-perfect drilling. 
  • Didn't Get it quite right? Level the TV, even after you install the mount. TV Looks good? Finish the job with the included cable management ties for a clean setup. 
  • Feel the ECHOGEAR tingle. We've got install gurus available 7 days a week, plus soundbar mounts, cable management & accessories to finish your setup.

About Full Tilt TV Mounts

 

 

Go ahead, put this Baby in a Corner!

They say well-behaved women rarely make history. Besides being a stretch of a nod to "Baby" Frances Houseman, what does that have to do with anything? Well, the same logic applies when it comes to this single-stud, full-motion corner mount. Mounting to one stud instead of two? Check. TV brackets designed with less parts taking 50% less time to put together? Check, check. 24" of extension? What?! That's 2 whole feet! Listen, this mount's on the run and its rule-breakin' design will thrive in whatever corner you put it!

 

Calling all single Studs

Awkward stud-spacing: Corner-mounting's #1 enemy since… well, forever, and that's exactly the obstacle that our product nerds kept front-of-mind when they tackled designing this mount. Finding a stud is tough enough as it is, and most mounts make you find two. Dumb. We're big believers in keeping it simple, so we're only gonna' make you find one. And with 24" of extension and up to 90-degrees of swivel, you'll be able to get the perfect corner placement you crave (even with 75" TV's ya'll), no matter where your stud sits.

 

If it fits, it sits... or, hangs. Whatever

In an attempt to look super-duper smart, you might have noticed that we've dropped a couple buzz words here and there when it comes to describing the functionality of this corner-capable mount. Still scratching your head about the "TV brackets and compatibility" we mentioned? Don't worry - we just figured out what it really meant, too. (Those nerdy product designers keep us on our toes with all their award-winning mount technology.) Simply put: A lot of today's swivel TV wall mounts are designed with a "Star" shaped bracket (that comes in 5 different pieces resulting in less than 5.7 million different ways to put it together). It looks exactly like you'd think - like a ninja star. Metal. Holes. Prettier than necessary to get the job done. This is all fine and good - except when it comes to compatibility and time to figure out how to put that shiz together. The star design is static, which means it's compatible only with a small number of VESA patterns. Because we believe that all flat-screen TVs deserve a chance to find their wall mount counterpart, we designed this one with that in mind. Enter our simplified TV bracket style. Its vertical brackets slide freely to expand along its wide, horizontal brackets, intuitively lining up with the holes on the back of your TV! In fact, if your TV has one of the following VESA patterns, this single-stud mount might be the one for you: 200 x 200, 200 x 300, 300 x 200, 300 x 300, 300 x 400, 400 x 200, 400 x 300, 400 x 400, 600 x 400

 

Installation so easy, we should just call it something less... scary. 

What's black and white and red all over? Well, a problematic pun, to start - this one relies on being asked out loud. But we've got a prime example of something black, white and READ all over: Our installation manuals. Yes, thanks to the highly-entertaining nature of our easy-to-follow installation manuals, they typically don't meet the unfortunate tossed-aside, never-opened fate of its competitor counterparts. Our token "funny guy," Mark, moonlights as a technical writer and has perfected the art of writing installation manuals that are as fun to read as the Sunday funnies. (PS: Are those still a thing?) They break installation down into an easy, three-step process: 1. Attach TV brackets, 2. Install wall plate, 3. Hang TV. Sure, there's some business in-between, but don't worry. Thanks to pre-divided, organized hardware and included drilling template, we've made the whole thing a stupid-simple, straight-up process that'll be over, done and ready to enjoy off in less than 30 minutes.

 

The Nerdy Stuff: 

  • TV Size Range: 32 - 75"
  • Weight Rating: 90 lbs
  • Swivel: +/- 90 degrees
  • VESA Patterns: 200 x 200, 200 x 300, 300 x 200, 300 x 300, 300 x 400, 400 x 200, 400 x 300, 400 x 400, 600 x 400
  • Extension: 24"
  • Product Depth/Profile: 1.9"
  • Tilt: 5 degrees up, 15 degrees down"
  • Model: EGCM2

 

TV Hardware Included:

TV screws (4 each) 

  • M4x12mm
  • M4x35mm
  • M6x12mm
  • M6x35mm
  • M8x16mm
  • M8x25mm
  • M8x35mm
  • M8x50mm

TV screw washers (4 each) M4, M6/M8

  • 8x 2.5mm spacers
  • 4x 22mm spacers
  • 2x TV brackets
  • Drill template
  • Wall plate with arm
  • 3x Wall plate covers
  • 2x Extension brackets
  • 4x Extension bracket screws
  • 2x Extension bracket end caps
  • 4x Extension bracket end cap screws
  • 2x 1/4" x 2 3/4" Lag screws
  • 2x Lag screw washers
  •  

 

 

Simple 3-Step Install

Not into puzzles? Hang with us. With an easy 3-step installation, you'll be done in less than 30 minutes. Your beer will still be cold.

egcm2-install1.jpg

1. Attach the brackets to your TV

egcm2-install2.png

2. Mount the wall plate using included drilling template

egcm2-install3.png

3. Connect TV to the wall plate

What's In The Box?

TV Brackets

egcm1-eg-oobe-1-1

Extensive Hardware

egcm1-eg-oobe-3-3

Instructions

Instructions & Template

 

Downloads

Hang with us, purchase this mount now on Amazon:

BUY ON AMAZON

Get your questions answered by TV mounting experts:

CONTACT US

Related Products

Upgrade your TV viewing experience even more with ECHOGEAR TV accessories. Here are some options compatible with this mount.

Full Motion Corner TV Mount - EGCM2
$74.99

Product Details

Product Description

 

 

egcm2-eg-header.jpg

Perfect For Corners

with the full motion corner TV mount

$99.99

$74.99

Product carousel goes here

  • One StudSingle-stud mount
  • Perfect for corners

    Perfect for mounting in corners

  • 90lbs-icon.jpg

    90 lbs weight rating

  • Extendo 24

    Full motion with 24" extension

Fits TV dimensions Extension Tilt Swivel
Up To 75" 24" 15º 90º

 Single-Stud full motion mount with 24" of extension making it ideal for corner applications.

  • Mount your TV anywher on the wall, even in the corner. Flexable single stud design fits TVs up to 65" In the corner, or uo to 75" on a flat wall. 
  • With smooth motion like you on the dance floor, points this TV anywhere you need to. Extends 24" from the wall plus buttery swivel & tilt. 
  • Get your TV to sit perfectly in the corner at whatever angle you need. Extend 24" from the wall plus buttery swivel & tilt/ 
  • Breezy install is done in under 30 minutes. This mount comes with pre-sorted hardware that fits any TV brand. Plus, you get an install template for picture-perfect drilling. 
  • Didn't Get it quite right? Level the TV, even after you install the mount. TV Looks good? Finish the job with the included cable management ties for a clean setup. 
  • Feel the ECHOGEAR tingle. We've got install gurus available 7 days a week, plus soundbar mounts, cable management & accessories to finish your setup.

About Full Tilt TV Mounts

 

 

Go ahead, put this Baby in a Corner!

They say well-behaved women rarely make history. Besides being a stretch of a nod to "Baby" Frances Houseman, what does that have to do with anything? Well, the same logic applies when it comes to this single-stud, full-motion corner mount. Mounting to one stud instead of two? Check. TV brackets designed with less parts taking 50% less time to put together? Check, check. 24" of extension? What?! That's 2 whole feet! Listen, this mount's on the run and its rule-breakin' design will thrive in whatever corner you put it!

 

Calling all single Studs

Awkward stud-spacing: Corner-mounting's #1 enemy since… well, forever, and that's exactly the obstacle that our product nerds kept front-of-mind when they tackled designing this mount. Finding a stud is tough enough as it is, and most mounts make you find two. Dumb. We're big believers in keeping it simple, so we're only gonna' make you find one. And with 24" of extension and up to 90-degrees of swivel, you'll be able to get the perfect corner placement you crave (even with 75" TV's ya'll), no matter where your stud sits.

 

If it fits, it sits... or, hangs. Whatever

In an attempt to look super-duper smart, you might have noticed that we've dropped a couple buzz words here and there when it comes to describing the functionality of this corner-capable mount. Still scratching your head about the "TV brackets and compatibility" we mentioned? Don't worry - we just figured out what it really meant, too. (Those nerdy product designers keep us on our toes with all their award-winning mount technology.) Simply put: A lot of today's swivel TV wall mounts are designed with a "Star" shaped bracket (that comes in 5 different pieces resulting in less than 5.7 million different ways to put it together). It looks exactly like you'd think - like a ninja star. Metal. Holes. Prettier than necessary to get the job done. This is all fine and good - except when it comes to compatibility and time to figure out how to put that shiz together. The star design is static, which means it's compatible only with a small number of VESA patterns. Because we believe that all flat-screen TVs deserve a chance to find their wall mount counterpart, we designed this one with that in mind. Enter our simplified TV bracket style. Its vertical brackets slide freely to expand along its wide, horizontal brackets, intuitively lining up with the holes on the back of your TV! In fact, if your TV has one of the following VESA patterns, this single-stud mount might be the one for you: 200 x 200, 200 x 300, 300 x 200, 300 x 300, 300 x 400, 400 x 200, 400 x 300, 400 x 400, 600 x 400

 

Installation so easy, we should just call it something less... scary. 

What's black and white and red all over? Well, a problematic pun, to start - this one relies on being asked out loud. But we've got a prime example of something black, white and READ all over: Our installation manuals. Yes, thanks to the highly-entertaining nature of our easy-to-follow installation manuals, they typically don't meet the unfortunate tossed-aside, never-opened fate of its competitor counterparts. Our token "funny guy," Mark, moonlights as a technical writer and has perfected the art of writing installation manuals that are as fun to read as the Sunday funnies. (PS: Are those still a thing?) They break installation down into an easy, three-step process: 1. Attach TV brackets, 2. Install wall plate, 3. Hang TV. Sure, there's some business in-between, but don't worry. Thanks to pre-divided, organized hardware and included drilling template, we've made the whole thing a stupid-simple, straight-up process that'll be over, done and ready to enjoy off in less than 30 minutes.

 

The Nerdy Stuff: 

  • TV Size Range: 32 - 75"
  • Weight Rating: 90 lbs
  • Swivel: +/- 90 degrees
  • VESA Patterns: 200 x 200, 200 x 300, 300 x 200, 300 x 300, 300 x 400, 400 x 200, 400 x 300, 400 x 400, 600 x 400
  • Extension: 24"
  • Product Depth/Profile: 1.9"
  • Tilt: 5 degrees up, 15 degrees down"
  • Model: EGCM2

 

TV Hardware Included:

TV screws (4 each) 

  • M4x12mm
  • M4x35mm
  • M6x12mm
  • M6x35mm
  • M8x16mm
  • M8x25mm
  • M8x35mm
  • M8x50mm

TV screw washers (4 each) M4, M6/M8

  • 8x 2.5mm spacers
  • 4x 22mm spacers
  • 2x TV brackets
  • Drill template
  • Wall plate with arm
  • 3x Wall plate covers
  • 2x Extension brackets
  • 4x Extension bracket screws
  • 2x Extension bracket end caps
  • 4x Extension bracket end cap screws
  • 2x 1/4" x 2 3/4" Lag screws
  • 2x Lag screw washers
  •  

 

 

Simple 3-Step Install

Not into puzzles? Hang with us. With an easy 3-step installation, you'll be done in less than 30 minutes. Your beer will still be cold.

egcm2-install1.jpg

1. Attach the brackets to your TV

egcm2-install2.png

2. Mount the wall plate using included drilling template

egcm2-install3.png

3. Connect TV to the wall plate

What's In The Box?

TV Brackets

egcm1-eg-oobe-1-1

Extensive Hardware

egcm1-eg-oobe-3-3

Instructions

Instructions & Template

 

Downloads

Hang with us, purchase this mount now on Amazon:

BUY ON AMAZON

Get your questions answered by TV mounting experts:

CONTACT US

Related Products

Upgrade your TV viewing experience even more with ECHOGEAR TV accessories. Here are some options compatible with this mount.

CONTACT US: 7 DAYS A WEEK

WE LIKE TO TALK, A LOT

855-428-2490 LET'S CHAT EMAIL

MON-FRI
8am – 7pm CDT
SAT-SUN
10:30am – 7pm CDT

Need to know the latest deets?
Sign up and be our friend.